Performance Trends, Inc.

Re: Performance Trends Newsletter (updates)

To: Visitors to Performance Trends Website

Subject: Product News/Updates, May 2018  

1. New Shock Dyno v1.1 C Update Released
2. Last April's Newsletter

 

to visit our www.performancetrends.com home page

to visit our facebook page and "like" us.

for our full You Tube channel

-------------------------------------------

1)  New Shock Dyno v1.1 C Update Released  We've been working a lot on new improvements to our Shock Dyno, both hardware and software.  We've now released a major update to the software, v1.1 C. It has several new enhancements and features.  

 

The Plus Version has several new features only available in the Plus, including:

• Combine up to 10 shocks in one test file.
• Allows for naming each shock as a number 1-10, R Front-L Front-etc., or any custom names you want.
• Measure Gas Force and Seal Drag.
• Import certain versions of Roehrig (tm) .cvp files for comparisons, analysis, etc.
• If you change the Force Sensor calibration, the test file can be updated to reflect this change.  Very handy for correcting mistakes or converting between force units of lbs, newtons or KG.
• Allows for input for each shock tested of "Adjustment", for number of clicks or most anything you want to record.  This info is displayed on graphs and reports for each shock.
• Shock Summary Report, listing critical data for each shock in a test, like Adjustment, peak Compression and Rebound force, temperature, gas force, seal drag, etc.
• Calculate Gas Force based on gas pressure, temperatures and strut diameter.
• On the Main Screen, there is an option for either displaying data as "Total Force Recorded" or "Eliminate Gas Force".

 

 

  for our User's Manual.  The new v1.1 C's features start on page 73.

  for more info on our Shock Dyno.  

Cost to update the Basic v1.1A to v1.1C is $200, v1.1B to v1.1C is $150.  Cost to update the Plus v1.1A to v1.1C is $350, v1.1B to v1.1C is $250.  If you want to update from an earlier Basic version and upgrade to the Plus v1.1C, contact us for details on package discounts.

  to send us an email about how you can update your existing shock dyno software.

-------------------------------------------

2) Last April's Newsletter Here are the topics covered in our previous newsletter.  If you would like another copy of April 2018's newsletter (or any previous newsletter) for detail on these topics, visit our website at: Performance Trends Newsletters 

1. New Air Flow Sensor Dyno DataMite Loggers
2. New Racepak (tm) Fuel Sensor Signal Conditioner for DataMite Loggers
3. New FAQs
4. Last March's Newsletter

Performance Trends reserves the right to discontinue, update, or modify its product line and pricing at any time.